Top seller
No results were found for the filter!
Flexible shaft with 6 mm collet for MINI MAX...
Flexible shaft with steel core for working on narrow and particularly difficult-to-access areas. All grinding tools from the MINI MAX®, MINI FIX and PINLOC systems can also be used with the flexible shaft. Features: Total length 140 cm. 6 mm steel shaft mounting connection. Collet for 6 mm shank tools. Can be used for tools up to 75 mm in diameter. Maximum speed 25,000 min-1.
€344.97
*
PINLOC backing pad with 1/4" thread
Flexible backing pad with 1/4” thread mount for safely mounting all PINLOC products. Features: Hardness: medium. Maximum speed 30,000 min-1. Disc thread: 1/4". Available backing pad mounts: 6 mm steel shaft, M14 thread.
From €12.90
*
ROHR MAX finger protection cover
For the additional protection against possible "finger injuries" on the belt drive roller, this robust "aluminum housing" according to DIN / VDE for the belt deflection was developed. This effectively prevents fingers being drawn into the drive. The attachment is simple and tool-free using knurled screws. The finger protection enables to stand the machine upright on the work...
€100.16
*
Grinder Grip Magnetic machine holder for angle...
The angle grinder accessories that make work easier, safer and more convenient . Attach your angle grinder securely to a magnetic surface when you "put it down" and keep it out of danger and yet within reach! A particularly powerful magnetic holder adaptable to many of the commercially available angle grinders promises attachment of the grinder to any magnetic surface in...
€50.92
*
Particulate Matter Protection Cap
The electrical structure is particularly protected, especially in the case of high volume of dust. Who does not know this: Metal dust collects inside the electrical device and causes a short circuit, which can destroy the device. The problem could be avoided by regularly "blowing out" the air inlet openings, but in daily practice this maintenance requirement is very often...
€33.87
*
Filter fabrics (10 pieces) for particulate...
Replacement filter fabrics suitable for particulate matter protection cap (item no. 40092). Content: 10 filter fabrics
€6.44
*
Expansion roller with M14 thread
For use of abrasive and polishing sleeves on the speed-controlled PTX COMPACT HT satin finishing machine. Features: Dimensions Ø 90 x 50 mm. M14 thread mount. Maximum speed 5,000 rpm. Highly elastic rubber compound for perfect workpiece adaptation.
€53.86
*
Special protection cover for VARILEX 1800
For safe grinding disc use. The locking mechanism makes the cover easy to change.
From €25.44
*
Protection cover for cutting disc 125 mm for...
For safe cutting disc use. The locking mechanism makes the cover easy to change.
€28.02
*
Work gloves
New work gloves for sensitivity and an outstanding grip for many applications in dry, wet, and oily environments. The EN388 standard and the good mechanical properties show that these work gloves is an outstanding all-rounder: outstanding resistance to oil, grease, and hydrocarbons; good resistance to organic solvents; resistant to heat and abrasion. Features: Made of...
€6.85
*
Ball joint mount for all machines with M8...
The robust ball joint mount transforms any mobile hand-held machine into a workshop. Grinding or deburring of small parts, polishing of individual pieces or sharpening blades – all these tasks can be performed with your mobile machine thanks to the ball joint mount. The rotary handle allows the ball joint to be locked safely and without tools – in any position! Features:...
€73.85
*
ROLEI flap wheel for ROLEI BE5 sheet metal...
Grinding mop wheels with high concentricity for one hundred percent deburring function. Thanks to the cotton design, it can be used universally for all metals. Tip: To avoid damage to the ROLEI BE 5 gearbox, only use original ROLEI mop wheels. Features: Dimensions 165 x 30 mm. High quality corundum fabric for optimal wear behavior. 100% cotton back fabric. One set (= 2...
€31.40
*
Viewed